11.5 GHP Intek Engine21R807-0072-G1• Dura-Bore™ cast iron cylinder sleeve• Float carburetor for consistent• Patented linear balancing system• Dual-Clean™ pleated paper air filter • OHV• Electric start with backup recoilSpecifications:• 344cc displacement• 1 x 3-5/32” Crankshaft, 1/4” Keyway, Tapped 7/16-20• 9 amp charging system• Two-year limited consumer...
44T977-0009-G1 Commercial Turf 24.0 GHP 724 1” x 3-5/32”, Tapped 7/16-20, 1/4” Keyway, Electric Start, Cyclonic Filtration
VANGUARD 810 SERIES EFI ENGINE - 28 HP Crankshaft: 1-1/8 x 4-19/64, Tapped 7/16 - 20, 1/4 Keyway, Starter Type: Recoil, VANGUARD EFI ENGINE - 28 HP#49E877-0005-G1Warranty: 3-year limited consumer, 3-year limited commmercialFeatures:• Cyclonic air filter• Full lubrication with spin-on oil filter• 12 volt solenoid shift starter and 20 amp DC alternator•...
VANGUARD 810 SERIES EFI ENGINE - 28 HP#49E877-0006-G1Crankshaft: 1 x 3-5/32, Tapped 7/16-20, 1/4 KeywayStarter Type: ElectricWarranty: 3-year limited consumer, 3-year limited commmercial
Briggs & Stratton Vanguard™ 627cc 23 Gross HP V-Twin OHV Electric Start Horizontal Engine 1" x 3" CS, 16A Alt, PTO Ball Bearing Model: 386447-0438-G1
XR550, 127cc, 5.5 GT, 3/4” x 2-27/64” Crankshaft, Tapped 5/16-24, 3/16” Keyway, Recoil Start
Briggs & Stratton Professional Series 810cc 27 Gross HP Electric Start Vertical Engine, 1-1/8" x 4-19/64" Crankshaft, Tapped 7/16"-20, 1/4" Straight Keyway
BS49T877-0017-G1 Engine Gross HP/Torque: 27hp Max RPM:3600 Engine Displacement:810 cc Crankshaft Type: Straight Crankshaft Rotations from PTO: Counter Clockwise Crankshaft Diameter (in.):1" Crankshaft Length (in.):3-5/32" Crankshaft Keyway (in.):1/4" Ignition System: Electronic Limited Warranty - Consumer:2 years Limited Warranty -...
950 9.5 GT 208cc 3/4 x 2-27/64 CS, Tapped 5/16-24, 3/16 Keyway Recoil Start
If there is no stock for an item, check the Reference to see if it has been superseded to a new part number. Also check Suppliers reference tab to see if it is no longer available which is indicated bby an n, s means that it has been superseded by the number in the reference tab. Not all items are listed due to a conflict with manufacturers using the same part number.
Should you experience an error when checking out call us. 877-880-2744 or 212-464-3338